Wedge Iron and Wonder Fuse Breakdown
You can always count on Clover to introduce a tool you didn’t know you needed. About a year ago, we introduced the Wonder Fuse to pair with our existing and very popular Wedge Iron. You can learn more about each tool here!
Wonder Fuse (Art. No 4090):
The Wonder Fuse is a paper backed fusible developed specifically for appliqué on apparel, quilts, embroidery, home decor and crafts. This fusible keeps fabric soft, ready to sew, and is recommended for your most delicate work. The package includes 10 pieces of 9x8in (230x200cm) sheets. The Wonder Fuse is available for purchase NOW! Look for them at your local craft and hobby stores, or purchase it on our website.
Wonder Fuse is very easy to use. Instructions are as follows.
- Reverse and trace your applique design creating a mirror image on the release paper side of Wonder Fuse. Cut fusible web slightly larger than the traced piece.
- Place fusible web (rough side) on the wrong side of the fabric. Use hot, dry iron and press for 5-8 seconds. *Note: always check your iron temperature with the fusible before you begin your work. Heavier fabric will require more time.
- After temperature cools down, cut applique to size, following outlines drawn on the paper backing. Once the paper is cut to size, go ahead and peel off paper backing.
- Place applique with the fusible web side down onto your project. Grab your hot. dry iron again to fuse applique to the background fabric. Optional: use a pressing sheet to prevent from damaging the fabric.
Something to keep in mind: Always pretest a swatch of fabric to ensure it is compatible with Wonder Fuse.
Want to know a little more? Read or watch Tool School: Wonder Fuse.
Wedge Iron (Art. No 9200):
The Wedge Iron (featured in the images above) is the perfect tool to pair with your Wonder Fuse. It has a simple, clean design that is ideal for all your sewing, quilting and crafting needs.
The flat sole plate surface has no steam holes, it tapers to a fine point for ease of ironing seams, small applique and difficult-to-reach areas. The soft handle allows a comfortable grip. The temperature dial is large and easy to set. The dry iron is safe to use on water sensitive fabrics such as silks.
Something to keep in mind: Always test the iron on the edge of the fabric or on an unnoticeable area to ensure it is compatible to use with fabric.
Temperature Settings are as follows:
- Low: Approx. 230°F/110°C (for acrylic)
- Medium: Approx. 300°F/150°C (for silk, wool, nylon, polyester)
- High: Approx. 390°F/200°C (for cotton, linen, viscose/rayon, triacetate)
Want to know a little more? Read or watch Tool School: Wedge Iron
Projects
Here are some projects to get you motivated. More projects on the way!
Tell us what you think on Facebook | Twitter | Instagram | Pinterest.